AP730

Multi-function I/O AcroPack® Module with Analog input, Analog output, Digital I/O, Counter/timers, PCIe Bus Interface

The AP730 mini PCIe-based interface board provides a variety of I/O functions on a single plug-in card. This new high-density module performs both high-speed and high resolution A/D and D/A conversions. It also includes digital I/O and counter/timer functions.

Now you can conserve your precious AcroPack slots and still get all the I/O functionality you need. The AP730 is designed for extreme versatility with many deluxe features to meet most applications. However, the AP730 is still very budget-friendly.

The AP730 modules are 70mm long (19.05mm longer than the full-length mini PCIe card at 50.95mm). The board’s width is the same as an mPCIe board at 30mm and uses the same standard board hold down standoff and screw keep out areas.

A down facing 100 pin Samtec connector will mate with the carrier card. This ensures a secure connection for your I/O. Fifty of these signals are available as field I/O signals.

Analog Inputs

Eight differential input channels: (±10.24V, ±10.0V, ±5.12V, ±5.0V, 0 to 10.24V, 0 to 10.0V, 0 to 5.12V ranges)
16-bit ADC with integral sample-and-hold and reference
1.264μS conversion time (791KHz rate)
1026 sample FIFO buffer
Programmable FIFO threshold conditions for interrupts, DMA transfers, and flags
User-programmable channel conversion sequence and timing
External trigger input or output
Factory calibration constants stored in on-board flash memory for error correction

Analog Outputs

Four analog output channels: (±3V, ±5V, ±10V, -2.5 to +7.5V, 0-5V, and 0-10V ranges)
Individual 16-bit DACs per channel with 7.5μS settling time
Flexible operating mode, trigger, and memory allocation
Configurable for direct access, single burst, continuous, or streaming (FIFO) output
Reliable software calibration with coefficients stored on-board
FIFO for waveform generation
Interrupt on user-programmable FIFO threshold
Shared 64K x 16-bit sample memory

Digital I/O

16 bidirectional input/output channels: (direction configured in 8-channel groups)
TTL-compatible thresholds
Programmable change-of-state/level interrupts
Failsafe power-up and system reset

Counter/Timers

Multi-function 32-bit counter/timer
– Quadrature Position measurement
– Pulse Width modulation
– Watchdog timer
– Event counter
– Frequency measurement
– Pulse-width or period measurement
One-shot and repetitive one-shot pulse waveform generation
Programmable interface polarity
Internal or external triggering
CMOS compatible thresholds

General

DMA transfer support to move data between module memory and PCIe bus
Software development tools for VxWorks®, Linux®, and Windows® environments

Ordering Options

Manuf. Part No		Part Description
AP730E-LF		AcroPack Multifunction I/O board

Carrier Cards

Manuf. Part No		Part Description
ACEX4040		Carrier for COM Express Type 10 and AcroPack I/O Modules
APCe7012		PCI Express Carrier Card for AcroPack® Modules
APCe7022		PCIe AcroPack carrier, holds 2 AP boards
APCe7040		PCIe AcroPack carrier, holds 4 AcroPack boards
APCe7043E		PCI Express Carrier Card for AcroPack® Modules
ACPS3310		3U cPCI® Serial Carrier Card for AcroPack Modules
ACPS3320		3U cPCI® Serial Carrier Card for AcroPack Modules
VPX4500		3U VPX AcroPack carrier, holds 3 AP boards
VPX4520		VPX Carrier Card for AcroPack® Modules
VPX4521		VPX Carrier Card for AcroPack® Modules
VPX4812A		VPX carrier card, 3U, one XMC slot.
VPX4814A		AcroExpress® VPX6600 system compatible. VPX carrier card, 3U, one XMC slot.
XMCAP2000		XMC AcroPack carrier, holds two AP modules

Accessories

Manuf. Part No		Part Description
AP-CC-01		Conduction-cool kit

Software

Manuf. Part No		Part Description
APSW-API-VXW		VxWorks® software support package
APSW-API-WIN		Windows® DLL Driver software package
APSW-API-LNX		Linux™ support (website download only)

+49(0)611 44889 400

info@systerra.de

Vetriebsbüros

Zubehör // Accessories
ACEX4040 Acromag		Carrier for COM Express Type 10 and AcroPack I/O Modules The ACEX4040 carrier card allows you to quickly combine a COM Express Type 10 CPU module with a mix of I/O modules for custom computing applications. With its rugged design and compact Mini-ITX form factor, this carrier card is easily mounted in a variety of enclosures for rapid development... more
APCe7012 Acromag		PCI Express Carrier Cards for one AcroPack or mini-PCIe Module Acromag’s APCe7012 interfaces one AcroPack mezzanine module to a PCI Express bus on a PC-based computer system... more
APCe7022 Acromag		PCI Express Carrier Cards for AcroPack Modules Acromag’s APCe7020 interfaces two AcroPack mezzanine modules to a PCI Express bus on a PC-based computer system... more
APCe7040 Acromag		PCI Express Carrier Cards for AcroPack Modules with four AcroPack or mini-PCIe mezzanine module slots Acromag’s APCe7040 interfaces four AcroPack mezzanine modules to a PCI Express bus on a PC-based computer system... more
APCe7043E Acromag		PCI Express Carrier Card for AcroPack® Modules with four AcroPack or mini-PCIe mezzanine module slots, 3/4-length PCIe x4 interface Acromag’s APCe7043E interfaces four AcroPack mezzanine modules to a PCI Express bus on a PC-based computer system... more
ACPS3310 Acromag		3U cPCI® Serial Carrier Card for AcroPack Modules The ACPS3310 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules. Two isolated I/O expansion slots interface AcroPack or mini PCIe modules to the PCIe bus. All connections to field signals are made through front panel connectors on the carrier board which passes them to the individual AcroPack modules... more
ACPS3320 Acromag		3U cPCI® Serial Carrier Card for AcroPack Modules The ACPS3320 is a 3U CompactPCI Serial carrier card for Acromag’s AcroPack mezzanine modules. Two I/O expansion slots interface AcroPack or mini PCIe modules to the PCIe bus. All connections to field signals are made through rear backplane connectors on the carrier board which passes them to the individual AcroPack modules... more
VPX4500 Acromag		VPX Bus Carrier Cards for AcroPack® Modules The VPX4500 is a 3U VPX carrier for up to three Acromag AcroPack (AP) mezzanine board modules. The carrier board provides a modular approach to system assembly since each carrier can be populated with any combination of analog input/output, digital input/output, communication, AP modules... more
VPX4520 Acromag		VPX Bus Carrier Cards for one XMC and four AcroPack® Modules, Expansion Plane Connection The VPX4520 carrier card provides a simple and cost-effective solution for interfacing one XMC and four AcroPack modules to a VPX computer system... more
VPX4521 Acromag		VPX Bus Carrier Cards for one XMC and four AcroPack® Modules, Data Plane Connection The VPX4521 carrier card provides a simple and cost-effective solution for interfacing one XMC and four AcroPack modules to a VPX computer system... more
VPX4812A Acromag		3U VPX Carrier for XMC Modules These 3U mezzanine carrier cards provide a simple and cost-effective solution for interfacing a XMC module to a VPX computer system. The carrier card routes power and bus signals to a plug-in mezzanine module through the VPX card slot connector... more
VPX4814A Acromag		3U VPX Carrier for XMC Modules These 3U mezzanine carrier cards provide a simple and cost-effective solution for interfacing a XMC module to a VPX computer system. The carrier card routes power and bus signals to a plug-in mezzanine module through the VPX card slot connector... more
XMCAP2000 Acromag		XMC Carrier Cards for AcroPack® or mini-PCIe Modules This board interfaces two AcroPack mezzanine modules to a PCI Express bus on an air-cooled XMC carrier. Two AcroPack module slots give you the freedom to mix a variety of I/O functions on a single board. Or, combine modules of the same type for almost one hundred channels on a single card. Either way, the XMCAP2020/2021 saves your precious card slots and reduces your costs... more

Return to last Page ...