The SRS-8442-SERIAL rack is equipped with two backplanes, left for CompactPCI® Serial cards, right for CompactPCI® Express boards (aka PXI Express™). In order to combine both worlds, a CompactPCI® Serial CPU with a mezzanine bus coupler bridge fits into both system slots, as a 10HP assembly.
The rack is provided with two removable power supplies, one for each backplane. Three 120mm fans mounted in a drawer below the card slots care for optimum cooling. All components were chosen for high reliability, as required e.g. for industrial usage and rugged applications.
Features
- 19-inch rack with CompactPCI® Serial and CompactPCI® Express (PXIe™) backplanes
- Two pluggable AC power supplies 550W in total, wide input range
- Dimensions 482.6mm x 177mm x 282mm (W x H x D), 4U/84HP
- AC or DC industrial grade power supply with wide input range
- Bottom mount fan unit
- Card Slots
- PICMG® CompactPCI® Serial backplane
- Suitable for CompactPCI® Serial cards 3U/4HP, IEEE card guide rails
- 1x CompactPCI® Serial system slot (CPU card) right aligned
- Recommended CPU card SC5-FESTIVAL or SC9-TOCCATA
- 6 x CompactPCI® Serial peripheral slots (I/O and mass storage cards)
- PICMG® CompactPCI® Express (PXI Express™) backplane
- CompactPCI® Express system slot (bus coupler board) left aligned
- Required bus coupler ECX-PCIE (mezzanine card on top of CPU board)
- 7 x CompactPCI® Express (PXIe™) hybrid peripheral slots
- AC Power Supply (SRS-8410)
- Two removable supplies, for CompactPCI® Serial backplane and for CompactPCI® Express backplane
- Power rating 300W/250W
- Input range 90-264VAC, 50-60Hz
- Output 12VDC 25A (minimum 0A), 5VSB 2.5A (minimum 0A)
- Line/load regulation <2%, ripple/noise <1%pp
- Efficiency >90%
- Active PFC 0.99
- Isolation voltage >4kVDC
- Short circuit & overload protection, thermal protection
- I2C monitoring
- EMI filtering EN55022 Class B, FCC
- Operating temperature -40°C to +70°C full rating
- Safety approvals: UL/CUL 60950-1:2005 (2nd Edition) Am 1:2009, EN 60950-1:2006, EN 60950-1:2006/A11:2009, EN 60950-1:2006/A1:2010, EN 60950-1:2006/A12:2011
- PwrBlade connector (Amphenol/FCI) suitable for power backplane
- AC mains rear power inlet (IEC plug)
- Cooling
- Three bottom mount fans, long life, low noise, ball bearings, for forced vertical airflow
- 120mm fans ebmpapst 12V 3.2W, 140m3/h, L10 70000h @40°C, 2400/min, VDE/CSA/UL/CE
- Reasonable clearance required below the rack
- Applications
- High reliable industrial computing (IoT, edge, fog)
- Test equipment
- Automotive e.g. experimental autonomous cars
- Custom specific modifications on request
Ordering Options
Manuf. Part No | | Part Description |
SRS-8442-SERIAL | | 4U/84HP cPCI Serial to PXIe, plus cPCI/PXI rack 7 slot cPCI-S backplane, 8slot PXIE hybrid backplane for usage with EKF CPU and ECX-PCIE, 2 x PSU, 250/300W 6 cPCI-S peripheral slots, 7 PXIe/PXI peripheral slots |
|