The TAMC200 is a standard double-width / mid-size or full size AMC.1 compliant carrier for up to three single-size or one double-size and one single-size IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. Three 68 pin SCSI-V (VHDCI/Champ) type connectors provides access to all IP I/O lines.

The TAMC200 is a versatile solution to upgrade well known legacy I/O solutions to a high performance form factor.

All IP interrupt request lines are mapped to PCIe INTA, alternatively Message Signaled Interrupts (MSI) can be used. For fast interrupt source detection the TAMC200 provides a special IP interrupt status register.

The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40°C to +85°C.

According to AMC.0, the TAMC200 provides an IPMI compliant Module Management Controller (MMC) with temperature monitoring and hot-swap support.

• Form Factor: PCIMG AMC.1 Module
• Board size: 180.6 x 146.5 mm
• Double-width / mid-size or full-size
• PCIe single lane (x1) port (AMC.1 Type 1 compliant)
• IPMI V 1.5 Support
• Front Panel LEDs:
  • Blue Hot-Swap LED
  • Red Power Good LED (LED1)
  • Green IP-Activity LED (LED 2)
• ANSI/VITA 4-1995 compliant interface to three IndustryPack modules
• 3 IndustryPack slots: three single-size IPs or one single-size and one double-size IP
• 8/32 MHz interface, no DMA
• 8 Mbytes IP memory space
• Routing of all IP interrupts to PCIe INTA/MSI, local interrupt status register
• I/O access: 68-pin SCSI-V (VHDCI/Champ) type connector per IP
• Self Healing fuses and RF-filtering on all IP power lines
• Operating temperature: -40...+85°C
• MTBF (MIL-HDBK217F/FN2 GB 20°C): 250.000 h
• 5 Years Warranty