systerra computer gmbh - home page
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Info
 
 
 
 
Location: Home >> Boards+Systems >> Mezzanines >> AMC Modules >> Mezzanine Carrier Boards
TAMC100 TEWS
  
TAMC100

TAMC100 AMC Carrier for 1 IndustryPack


TAMC100

TAMC100 Blockdiagram


TAMC100 Datasheet TAMC100 Datasheet
TAMC100 Manual TAMC100 Manual
AMC Carrier for 1 IndustryPack

The TAMC100 is a standard single width / mid-height AMC.1 compliant carrier for one single-size IndustryPack (IP) module used to build up modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control. A HD50 SCSI-2 type connector provides access to all IP I/O lines.

The TAMC100 is a versatile solution to upgrade well known legacy I/O solutions to a high performance form factor.
All IP interrupt request lines are mapped to PCIe INTA, alternatively Message Signaled Interrupts (MSI) can be used. For fast interrupt source detection the TAMC100 provides a special IP interrupt status register.

The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40°C to +85°C.
According to AMC.0, the TAMC100 provides an IPMI compliant Module Management Controller (MMC) with temperature monitoring and hot-swap support.

The TAMC100 is available as mid-size module or as full-size module. The mid-size option has restrictions to its usage on AdvancedTCA carriers because of a component height violation, but allows improving the density of a μTCA system.

For First-Time-Buyers the engineering documentation TAMC100-ED is recommended. The engineering documentation includes TAMC100-DOC, schematics and data sheets of TAMC100.

    Features
    • Form Factor: PCIMG AMC.1 Module
    • Board size: 180.6 mm x 73.5 mm
    • Single width / Mid-height
    • PCIe single lane (x1) port (AMC.1 Type 1 compliant)
    • IPMI Support
    • Front Panel LEDs:
      • Blue Hot-Swap LED
      • Red Power Good LED (LED1)
      • Green IP-Activity LED (LED 2)
    • ANSI/VITA 4-1995 compliant interface to one IndustryPack module
    • IndustryPack slot: one single-size
    • 8/32 MHz interface, no DMA
    • 8 Mbytes IP memory space
    • Routing of all IP interrupts to PCIe INTA/MSI, local interrupt status register
    • I/O access: HD50 SCSI-2 type connector
    • Self Healing fuses and RF-filtering on all IP power lines
    • Operating temperature: -40...+85°C
    • MTBF (MIL-HDBK217F/FN2 GB 20°C): 633.000 h
    • 5 Years Warranty


    Ordering Options

    Manuf. Part NoPart Description
    TAMC100-10AMC Carrier for 1 IndustryPack, Mid-size front panel
    TAMC100-10RRoHS compliant version of
    TAMC100-11AMC Carrier for 1 IndustryPack, Full-size front panel
    TAMC100-11RRoHS compliant version of TAMC100-11
    TAMC100-DOCUser Manual for TAMC100
    TAMC100-EDEngineering Documentation for TAMC100 - includes user documentation TAMC100-DOC; Schematics; Data sheets
    CARRIER-SW-42VxWorks IP Carrier Software Support
    CARRIER-SW-65Windows XP/2000 IP Carrier Software Support
    CARRIER-SW-72LynxOS IP Carrier Software Support
    CARRIER-SW-82Linux IP Carrier Software Support
    CARRIER-SW-95QNX 6 IP Carrier Software Support
    Generic driver support for 3rd party IndustryPack modules; Important note: this IP Carrier Software Support is included in each TIPxxx-SW-xx!
    For support of 3rd party IP carriers contact systerra computer.

    Zubehör // Accessories
    Manufacturer Photo Part No Description
    TEWS TAMC200 AMC Carrier for 3 IndustryPack AMC Carrier for 3 IndustryPack
    Double width / mid-size or full-size AMC.1 compliant carrier for 3 IndustryPack modules; IPMI V1.5 Support; 8/32 MHz IP interface, no DMA; Routing of all IP interrupts on PCIe INTA/MSI, local interrupt status register; Self healing fuses and RF-filtering for the power supply of the IndustryPack slots; 68-pin SCSI-V type connectors and Status LEDs in front panel; Operating temperature -40°C to +85°C ... more
    Return to last Page ...
     
    Home | Contact | Register systerra computer GmbH | Kreuzberger Ring 22 · D-65205 Wiesbaden | Tel: +49 (0) 611 9748 470 | Fax: +49 (0) 611 9748 479