MAXBES is ideally suited for any rugged or industrial network applications. Due to the low power consumption, robust and flexible design, the products are well suited for any embedded system. It is the perfect fit, whether they are used in a rugged, hot or other harsh environment. The MAXBES makes it easy to set up a challenging network.
The MAXBES comes with 8-ports 1Gbit and 2-ports 10Gbit speed. The eight 1GBit ports are either available as eight RJ45 copper ports or four RJ45 copper ports and four 1GBit SFP. The open frame version also offers lockable headers instead of RJ45. All ports have status LEDs, indicating the activity and speed of each port.
The MAXBES solution is extremely compact and can be used as an open frame solution or in a MIL housing with connectors of your choice. Supply power is 8–36VDC (consuming less than 15W). The product can be operated at -20°C...+60°C and optionally even up to +70°C.
For the fiber ports, most Ethernet compatible transceivers (acc. MSA) can be used. It allows the users to select the appropriate transceiver for each link. As managed switch, the product gives access to various switch settings to configure features like: Quality of Service, VLAN, Rapid Spanning Tree, etc.. To adjust these switch settings, MPL provides an easy-to-use web interface.
MAXBES Highlights
- Includes two 10Gbit SFP+ ports
- RJ45 & header Versions
- Wide input 8-36VDC
- Fully manageable over Web Interface or Telnet
- Copper or mixed Copper/Fiber versions
- Fanless operation
- IGMPv3 support
- Port trunking
Technical Features
Board Key Data:
- high performance switch lookup engine (up to 16k MAC entries), IEEE 802.3x flow control
- back pressure flow control
- 2 status LEDs / copper port (Link/Activity and Speed indicators), 1 LED / SFP (Link/Activity indicators)
- external Status LEDs for remote indication are available over lockable header
Interfaces / Ports:
8x 1Gbit copper, 2x 10Gbit SFP+ / or 4x 1Gbit copper, 4x 1GBit SFP, 2x 10Gbit SFP+
- copper ports auto crossover (Auto MDI/MDIX) support, auto polarity correction/negotiation.
- 802.3az Energy Efficient Ethernet
- 1Gbit SFP ports support all MSA compliant / Ethernet compatible 1GBit SFP
- digital diagnostics monitoring (DDM) and triple speed copper SFP
- 10Gbit SFP ports (2x) support all MSA compliant, Ethernet compatible 10Gbit SFP+, 1Gbit SFP, direct attached cable SFP+
Managed Software
MPL developed and maintains a management SW with easy to use web interface.
Power
- Input voltage 8VDC...36VDC Input range, reverse polarity protection
- Power consumption 15W
Environment
- Storage Temperature -45...+85°C (-49°F...+85°F)
- Operating Temperature -20...+60°C (-4°F...+140°F) at full operation, optionally up to 70°C (158°F)
- Relative Humidity 5% to 95% none condensing
Standard Compliance
The MAXBES is designed to meet or even exceed the most common standard.
Particular references are:
- EMC: EN 55022, EN 55024, EN 61000, MIL-STD-461E
- Shock & Vibration: EN 60068
- Environmental & Safety: EN 50155, MIL-STD-810-F, EN 60601, EN 60950
- Approval List: CE, IEC 60945, IACS E10
The MAXBES family has been successfully tested according EN50155, MIL-STD-810-G as well as CE marking
Der neue MAXBES Switch bietet acht Ports mit 1Gbit und zwei Ports mit 10Gbit Geschwindigkeit. Die 1Gbit-Ports sind entweder alle mit RJ45 Steckern oder 4x RJ45 und 4x 1Gbit SFP verfügbar. Die beiden 10Gbit-Ports sind SFP+ Ports.
Die Open-Frame-Version ist anstelle von RJ45 auch mit lockable Headern erhältlich.
Die Aktivität der einzelnen Ports wird über Status-LEDs auf der Frontplatte angezeigt.
Die MAXBES Lösung ist äußerst kompakt und kann als Board-Level-Produkt oder - je nach Anforderung - in unterschiedlichen robusten Aluminiumgehäusen eingebaut bestellt werden.
Die Spannungsversorgung (8...36VDC) kommt mit Verpolungsschutz (optional mit redundanten Eingang). MAXBES benötigt weniger als 15 W Leistungsaufnahme bei Volllast.
Das Produkt kann im erweiterten Temperaturbereich von -20...+60°C betrieben werden.
Die SFP+ Steckplätze unterstützten 10Gbit und 1Gbit Ethernet-kompatible und MSA konforme SFP+ Module. Auch für die optionalen vier 1Gbit SFP Ports können alle auf dem Markt verfügbaren 1Gbit kompatiblen SFP-Transceiver (gemäss MSA) verwendet werden. Dies ermöglicht den Benutzern, die entsprechenden Transceiver für jede Verbindung zu wählen.
Die MAXBES Produkte unterstützen Support-Funktionen wie zum Beispiel:
- Konfigurierbar über Web Interface (inkl. SSL), Telnet, SNMP (inkl. SNMPv3) oder RS232
- Port-basiert und IEEE 802.1Q VLAN
- IEEE 802.1D Rapid Spanning Tree Protocol
- IEEE 802.1X MAC Adressprüfung
- Quality of Service
- Portüberwachung
- Switch Statistiken
- Digitale Diagnoseüberwachung (DDM) nach SFF-8472
- Firmware-Update über HTTP oder TFTP
- Down- und Upload der Konfigurationsdateien im XML-Format
- IGMPv3 Support
- Port Trunking
Standards und Zertifizierungen:
Der MAXBES erfüllt oder übertrifft die meisten gebräuchlichen Standards:
- EMC: EN 55022, EN 55024, EN 61000, MIL-STD-461E
- Shock & Vibration: EN 60068
- Umweltbedingungen & Sicherheit: EN 50155, MIL-STD-810-F, EN 60601, EN 60950
- Approval List: CE, IEC 60945, IACS E10
Die MAXBES Familie wurde erfolgreich entsprechend EN50155, MIL-STD-810-G und CE Marking getestet.
Diese und weitere Funktionen machen den MAXBES zum idealen Kandidaten für jede robuste, industrielle und sichere Netzwerk-Anwendung. Aufgrund des geringen Stromverbrauches, robusten und flexiblen Designs, ist das Produkt gut geeignet für embedded Systeme und Lösungen.
Ordering Options
Manuf. Part No | | Part Description |
MAXBES-F00x | | 10 Port Ethernet Switch, Standard housing, Flange mounting, 8x RJ45, 2x SFP+ |
MAXBES-F33x | | 10 Port Ethernet Switch, Standard housing, Flange mounting, 4x RJ45, 4x 1Gbit SFP, 2x SFP+ |
MAXBES-F64x | | 10 Port Ethernet Switch, Standard housing, Flange mounting, 6x M12, 2x 1Gbit SFP, 2x SFP+ |
MAXBES-F44x | | 10 Port Ethernet Switch, Standard housing, Flange mounting, 8x Copper on Header, 2x SFP+ |
MAXBES-D00x | | 10 Port Ethernet Switch, Standard housing, Din-Rail mounting, 8x RJ45, 2x SFP+ |
MAXBES-D33x | | 10 Port Ethernet Switch, Standard housing, Din-Rail mounting, 4x RJ45, 4x 1Gbit SFP, 2x SFP+ |
MAXBES-D64x | | 10 Port Ethernet Switch, Standard housing, Din-Rail mounting, 6x M12, 2x 1Gbit SFP, 2x SFP+ |
MAXBES-D44x | | 10 Port Ethernet Switch, Standard housing, Din-Rail mounting, 8x Copper on Header, 2x SFP+ |
MAXBES-M00x | | 10 Port Ethernet Switch, MIL housing, 8x RJ45, 2x SFP+ |
MAXBES-M33x | | 10 Port Ethernet Switch, MIL housing, 4x RJ45, 4x 1Gbit SFP, 2x SFP+ |
MAXBES-M64x | | 10 Port Ethernet Switch, MIL housing, 6x M12, 2x 1Gbit SFP, 2x SFP+ |
MAXBES-M44x | | 10 Port Ethernet Switch, MIL housing, 8x Copper on Header, 2x SFP+ |
MAXBES-O00x | | 10 Port Ethernet Switch, OPEN FRAME, 8x RJ45, 2x SFP+ |
MAXBES-O33x | | 10 Port Ethernet Switch, OPEN FRAME, 4x RJ45, 4x 1Gbit SFP, 2x SFP+ |
MAXBES-O64x | | 10 Port Ethernet Switch, OPEN FRAME, 6x M12, 2x 1Gbit SFP, 2x SFP+ |
MAXBES-O44x | | 10 Port Ethernet Switch, OPEN FRAME, 8x Copper on Header, 2x SFP+ |
MAXBES-RF00x | | 10 Port Ethernet Switch, Rugged / Railway housing, Flange mount, 8x RJ45, 2x SFP+ |
MAXBES-RF33x | | 10 Port Ethernet Switch, Rugged / Railway housing, Flange mount, 4x RJ45, 4x 1Gbit SFP, 2x SFP+ |
MAXBES-RF64x | | 10 Port Ethernet Switch, Rugged / Railway housing, Flange mount, 6x M12, 2x 1Gbit SFP, 2x SFP+ |
MAXBES-RF44x | | 10 Port Ethernet Switch, Rugged / Railway housing, Flange mount, 8x Copper on Header, 2x SFP+ |
MAXBES-RD00x | | 10 Port Ethernet Switch, Rugged / Railway housing, DIN-Rail mount, 8x RJ45, 2x SFP+ |
MAXBES-RD33x | | 10 Port Ethernet Switch, Rugged / Railway housing, DIN-Rail mount, 4x RJ45, 4x 1Gbit SFP, 2x SFP+ |
MAXBES-RD64x | | 10 Port Ethernet Switch, Rugged / Railway housing, DIN-Rail mount, 6x M12, 2x 1Gbit SFP, 2x SFP+ |
MAXBES-RD44x | | 10 Port Ethernet Switch, Rugged / Railway housing, DIN-Rail mount, 8x Copper on Header, 2x SFP+ |
x=0: no serial CLI; x=1: with serial CLI
|