The TXMC897 is a Switched Mezzanine Card (XMC) compatible module providing a two channel 100Base-TX / 1000Base-T / 2.5GBase-T / 5GBase-T / 10GBase-T Ethernet and a two channel Enhanced Small Form Factor Pluggable (SFP+) 10 Gigabit Ethernet interface.
The XMC-Connector P15 provides access to the Intel X710-TM4/AT2 quad/dual port 10GbE controller via an x8/x4 PCIe link.
Two Ethernet interfaces support 100, 1000 Mbit/s and 2.5, 5, 10 Gbit/s transmission rates and the two SFP+ Cages accept various SFP and SFP+ transceiver modules. These two SFP+ hosts are connected to the Ethernet Controller's SFI Interfaces.
The following transceiver modules have been successfully tested with the TXMC897-20R:
- Intel XDACBL1M (SFP+ Direct Attach Twinaxial Cable)
- Finisar FCBG110SD1C01 (SFP+ SFPwire Active Optical Cable)
- Intel E10GSFPSR (SFP+ 10GBase-SR/SW or 1000Base-SX)
- Finisar FTLX8571D3BCV (SFP+ 10GBase-SR/SW or 1000Base-SX)
- Intel E10GSFPLR (SFP+ 10GBase-LR/LW or 1000Base-LX)
- Finisar FTLX1471D3BCV (SFP+ 10GBase-LR/LW or 1000Base-LX)
- 10Gtek ASF-10G-T (SFP+ 10GBase-T)
- Finisar FCLF8522P2BTL (SFP 1000Base-T)
All compatible transceiver modules and replacements of the tested modules will also work properly with the TXMC897. For preconfigured variants of the hardware module containing transceiver modules, please contact systerra.
The controller is equipped with a 64 Mbit Serial Flash to support PXE and iSCSI boot and LEDs indicate the different network activities.
The four/two Ethernet interfaces of the TXMC897 are capable of performing an auto negotiation algorithm which allows both link-partners to determine the best link-parameters. The TXMC897 supports IEEE 1588/802.1AS Precision Time Protocol (PTP).
The TXMC897-10R provides two 10GBase-T Ethernet interfaces via front panel RJ45 connectors.
The TXMC897-20R provides two 10GBase-T Ethernet interfaces via front panel RJ45 connectors and two 10 Gigabit Ethernet interfaces via front panel SFP+ connectors.
Features
- Short single-width XMC module
- 2 channel 10GBASE-T / NBASE-T / 1000BASE-T / 100BASE-TX and 2 channel SFP+ 10 Gigabit
- IPMI resource: FRU hardware definition information stored in on-board EEPROM
- PXE and iSCSI boot (64 Mbit serial flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP)
- Front I/O via 2 RJ45 connectors and 2 SFP+ connectors
Das TXMC897 ist ein Switched Mezzanine Card (XMC) kompatibles Modul, das eine zweikanalige 100Base-TX / 1000Base-T / 2,5GBase-T / 5GBase-T / 10GBase-T Ethernet und eine zweikanalige Enhanced Small Form Factor Pluggable (SFP+) 10 Gigabit Ethernet Schnittstelle bietet.
Der XMC-Connector P15 ermöglicht den Zugriff auf den Intel X710-TM4/AT2 Quad/Dual Port 10GbE Controller über einen x8/x4 PCIe Link.
Zwei Ethernet-Schnittstellen unterstützen 100, 1000 Mbit/s und 2,5, 5, 10 Gbit/s Übertragungsraten und die beiden SFP+ Cages nehmen verschiedene SFP und SFP+ Transceiver-Module auf. Diese beiden SFP+ Hosts sind mit den SFI-Schnittstellen des Ethernet Controllers verbunden.
Die folgenden Transceivermodule wurden erfolgreich mit dem TXMC897-20R getestet:
- Intel XDACBL1M (SFP+ Direct Attach Twinaxial Cable)
- Finisar FCBG110SD1C01 (SFP+ SFPwire Active Optical Cable)
- Intel E10GSFPSR (SFP+ 10GBase-SR/SW or 1000Base-SX)
- Finisar FTLX8571D3BCV (SFP+ 10GBase-SR/SW or 1000Base-SX)
- Intel E10GSFPLR (SFP+ 10GBase-LR/LW or 1000Base-LX)
- Finisar FTLX1471D3BCV (SFP+ 10GBase-LR/LW or 1000Base-LX)
- 10Gtek ASF-10G-T (SFP+ 10GBase-T)
- Finisar FCLF8522P2BTL (SFP 1000Base-T)
Alle kompatiblen Transceivermodule und Ersatzmodule der getesteten Module funktionieren auch mit dem TXMC897.
Für vorkonfigurierte Varianten des Hardwaremoduls mit Transceivermodulen wenden Sie sich bitte an systerra.
Der Controller ist mit einem 64 Mbit Serial Flash ausgestattet, um PXE- und iSCSI-Boot zu unterstützen, und LEDs zeigen die verschiedenen Netzwerkaktivitäten an.
Die vier/zwei Ethernet-Schnittstellen des TXMC897 sind in der Lage, einen Auto-Negotiation-Algorithmus durchzuführen, der es beiden Link-Partnern erlaubt, die besten Link-Parameter zu bestimmen. Der TXMC897 unterstützt das IEEE 1588/802.1AS Precision Time Protocol (PTP).
Der TXMC897-10R bietet zwei 10GBase-T-Ethernet-Schnittstellen über RJ45-Anschlüsse an der Frontplatte.
Der TXMC897-20R bietet zwei 10GBase-T-Ethernet-Schnittstellen über RJ45-Anschlüsse auf der Vorderseite und zwei 10-Gigabit-Ethernet-Schnittstellen über SFP+-Anschlüsse auf der Vorderseite.
Eigenschaften
- Short single-width XMC Module
- 2 Kanal 10GBASE-T / NBASE-T / 1000BASE-T / 100BASE-TX und 2 Kanal SFP+ 10 Gigabit
- IPMI-Ressource: Im EEPROM gespeicherte FRU-Hardware-Definitionsinformationen
- PXE und iSCSI Boot (64 Mbit Serial Flash)
- IEEE 1588/802.1AS Precision Time Protocol (PTP)
- Front I/O via 2 RJ45 Anschlüsse und 2 SFP+ Anschlüsse
Ordering Options
Manuf. Part No | | Part Description |
TXMC897-10R | | 2 Channel 10GBASE-T Ethernet; RJ45 Front I/O |
TXMC897-20R | | 2 Channel 10GBASE-T and 2 Channel SFP+ 10 Gigabit Ethernet; RJ45 and SFP+ Front I/O |
Software Support for Intel at: www.intel.com
For operating systems not supported by Intel, please contact systerra
|