The TPMC461 is a standard single-width 32-bit PMC module and offers 8 channels of high performance asynchronous serial interface.
Three different standard modules are available: The TPMC461-10R provides 8 RS232 interfaces. The TPMC461-11R provides 8 RS422 interfaces. The TPMC461-12R provides 4 RS232 and 4 RS422 interfaces.
Other configurations are available as factory build option on a per channel base.
All modules offer front panel I/O with a HD50 SCSI-2 type connector and P14 I/O. Each RS232 channel supports RxD, TxD, RTS, CTS and GND. Each RS422 channel supports RxD+/-, TxD+/- and GND. Two channels of the TPMC461-10R/-12R offer full modem support (TxD, RxD, CTS, RTS, DSR, DTR, CD, RI and GND) for RS232. Two channels of the TPMC461-11R support RxD+/-, TxD+/-, RTS+/-, CTS+/- and GND for RS422.
Each channel has 64 byte transmit and receive FIFOs to significantly reduce the overhead required to provide data to and get data from the transmitters and receivers. The FIFO trigger levels are programmable and the baud rate is individually programmable up to 921.6 kbps for RS232 channels and 5.5296 Mbps for RS422 channels. The UART offers readable FIFO levels.
All channels generate interrupts on PCI interrupt INTA. For fast interrupt source detection the UART provides a special Global Interrupt Source Register.
All serial channels use ESD protected transceivers. ESD protection is up to ±15 KV.
The TPMC461 can operate with 3.3 V and 5.0 V PCI I/O signaling voltage.
Software Support (TDRV002-SW-xx) for different operating systems is available.
Features
- Standard single-width 32 bit PMC module
- 8 channels RS232 and/or RS422 interfaces
- High performance asynchronous serial interface (up to 5.5296 Mbps)
- Hardware handshake and full modem support available
- 64 byte FIFO
- Front panel I/O (HD50 SCSI-2 type connector) and P14 I/O
Ordering Options
| Manuf. Part No. | | Product Description |
| TPMC461-10R | | 8 Channel Serial RS232, HD50: 8 channels of high performance RS232 asynchronous serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C |
| TPMC461-11R | | 8 Channel Serial RS422, HD50: 8 channels of high performance RS422 asynchronous serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 2 channel offer RTS+/-, CTS+/-; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS422 line driver/receiver; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C |
| TPMC461-12R | | 4 Channel Serial RS232, 4 Channel Serial RS422, HD50: 4 channels of high performance RS232 asynchronous serial interface; Programmable baud rates up to 921.6 Kbaud ; Support of RxD, TxD, RTS, CTS, GND per channel; 2 channel with full modem support; 4 channels of high performance RS422 serial interface; Programmable baud rates up to 5.5296 Mbaud; Support of RxD+/-, TxD+/- and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per channel, programmable trigger levels for FIFO's; ESD protected RS232 / RS422 line driver/receiver up to 15KV; HD50 SCSI-2 type connector mounted in front panel and P14 I/O; PCI I/O signaling voltage 3.3V and 5V; Operating temperature -40°C to +85°C |
Software and Documentation
| Manuf. Part No. | | Product Description |
| TPMC461-DOC | | User Manual for TPMC461 |
| TDRV002-SW-25 | | Integrity Software Support: Device driver; Source code; Programmer documentation |
| TDRV002-SW-42 | | VxWorks Software Support: Legacy and VxBus-enabled Software Support; VxWorks Device driver; Source code; Programmer documentation |
| TDRV002-SW-65 | | Windows Software Support: Device driver; Programmer documentation |
| TDRV002-SW-82 | | Linux Software Support: Device driver; Source code; Programmer documentation |
| TDRV002-SW-95 | | QNX Software Support: Device driver; Source code; Programmer documentation |
For other operating systems please contact systerra.
Accessories
| Manuf. Part No. | | Product Description |
| TA101 | | HD50 Cable: 1.8 m cable with two 50 pin male SCSI-2 type connectors. The permissible maximum voltage for the TA101 is 30V DC. |
| TA201 | | HD50 Terminal Block: 50 pin terminal block with 50 pin female SCSI-2 type connector. The permissible maximum voltage for the TA201 is 30V DC. |
| TA301 | | Cable Kit for Modules with HD50 Connector: 1.8 m cable with two 50 pin male SCSI-2 type connectors; 50 pin terminal block with 50 pin female SCSI-2 type connector. The permissible maximum voltage for the TA301 is 30V DC. |
| TPIM001 | | PIM I/O Module with 50 pin Connector: PIM I/O module used with any PIM carrier; I/O lines 1 to 50 routed to a HD50 SCSI-2 type connector in EMI front panel; Operating temperature -40°C to +85°C |
|
