NEW - Fiber or Copper Connectivity, 100Mbit or 1Gbit, Tempest Level A, for use in 19" Rack System or in the Single Slot Unit
|
Data Diodes are used to allow secure
networks to receive data from open/
general purpose networks.
Unidirectional transfer of data over
fiber cable or copper cable between two
networks with hardware separation to
guarantee security.
This completely eliminates the risk for data
flowing in false direction.
Fiber or Copper interface can be chosen independantly for In and Out. No need for extra converter!
The Fibersystem Data Diodes communication gives the following advantages
- One-way connection between two networks (also known as Simplex)
- Based on hardware, no extra software needed. This completely eliminates the risk for data flowing in false direction
- Fiberoptical links for galvanic seperation between networks
- Can be used in any ethernet application using fiber or copper connectivity
- All data will be transparently forwarded
- Ethernet and or Fiber based
- Supports: Syslog, NTP Broadcast, SNMP traps
- Supports: UDP (Unicast, Broadcast, Multicast, Manycast)
- For Queue Mgmt, Logging, Mail, FTP, SNMP and SDK. Additional software is needed
Models
- Data Diode 100Mbit MM Secure
- Data Diode 1Gbit MM Secure Tempest
- Data Diode 1000BaseTX/SX to TX MM
- Data Diode 1000BaseSX to TX/SX MM
- Data Diode 1000BaseTX/SX to SX MM
- Data Diode 100BaseTX to FX MM
- Data Diode 100BaseTX to TX MM
- Data Diode 100BaseFX to TX MM
Technical Data
Galvanic/Electrical link
- Data speed 100Mbit or 1Gbit depending on model
Fiber optic links
- Data speed 100Mbit or 1Gbit depending on model
- Wavelength 850nm
- Fiber optical or Copper interface
- Fiber Multi mode 50/125μm or 62.5/125μm
- Optical system budget 13dB in 62.5/μm. 9dB in 50/125μm fiber
- Typical distance 0 – 2km (3dB system margin for 50/125μm and 6dB for 62.5/125μm)
Ordering Options
Please refer to the Datasheet or contact systerra computer GmbH
|
|